TMPro module 130 - BMW Mini CAS Siemens-VDO

Name: TMPro module 130 - BMW Mini CAS Siemens-VDO
SKU: TMPRO2M130
Price: 400.00 EUR
Availability: InStock

TMPro module 130 – BMW Mini CAS Siemens-VDO

400,00 € excl. VAT

Module for creating immobilizer transponders for Siemens-VDO CAS modules used in BMW and Mini vehicles. Easy and efficient solution.

Important Information:

We sell new and unused goods (unless stated otherwise)!
Before each shipment, the goods are inspected and/or tested for functionality, if possible.
Delivery times may be affected by the courier service.
We also perform repairs on control units and can assist you.

Memory device is Motorola MCU 912DG256 or 9S12DG256 or 9S12XDP512
Expected file size is 2048 or 4096 bytes.

IMPORTANT NOTE: Motorola MCU is locked, not possible to read/write with TMPro.

If job is ALL KEYS LOST and you get message that file is CAS3+:

if ISN is 16 bytes you need eeprom file read from engine ECU
if ISN is 2 bytes it is not possible to make key with TMPro

If job is SPARE KEY – in all cases you need just CAS file.

for ECU with MPC556 MCU you must read external eeprom 95c640
for ECU with TRICORE MCU you must read eeprom from TRICORE

Use TMPro chip or PCF7936 transponder or remote key.

Written transponder or remote key is ready programmed to start car.

To activate remote: insert key to turn ignition ON. Remove key. Press any button few times. Repeat these steps till remote starts to work.

If you have got locked CHINESE BMW HITAG2 remote keys, you can UNLOCK them and set as BRAND NEW so you can use them again with any car.

Vehicles equipped with this unit:
BMW: series 1, series 3, series 5, series 6, X-3, X-5, X-6
Mini: Cooper

Important Information: Before purchasing the module, make sure you also have the TMPro2 Transponder Key Programmer. This module cannot function independently!